[TUT] FIX ARB4 Bricked RN5 (QHSUSB 9008) with MIFLASH/QFIL
MIFLASH METHOD
Downloads:
MiFlash 2018
Prog Emmc Firehose ELF(Patched) mirror
Credits: Chocoml
Any ARB4 fastboot rom:
Global: http://bigota.d.miui.com/V9.6.4.0.OE
China: http://bigota.d.miui.com/V10.0.1.0.OE
1. Download dan Extract fastboot rom folder. bisa mengunakan fastboot rom versi terbaru. Jika menggunakan varian Global maka gunakan Global fastboot rom and jika varian China gunakan China fastboot rom untuk menghindari stuck di logo recovery (Miui version can't be installed in this device).
2. Download dan Replace file "prog_emmc_firehose_Sdm660_ddr.elf" dengan file patched diatas di folder fastboot images.
3. coba nyalakan ulan phone. tahan tombol Power kira-kira 20-30 detik atau agak lama. atau coba bberapa kombinasi tombol, (HOLDPower + VolDOWN) atau (Power + VolUP), atau (Power + VolDOWN + VolUP).
4. Connect phone ke PC, buka MIFLASH, load folder fastboot rom.
5. pilih opsi CLEAN ALL and flash.
6. cara flash via MIFlash
QFIL/QPST METHOD
Downloads:
QPST/QFIL
Prog Emmc Firehose MBN(Patched) mirror Credits: Chocoml
Any ARB4 fastboot rom:
Global: http://bigota.d.miui.com/V9.6.4.0.OE...f5ee62becf.tgz
China: http://bigota.d.miui.com/V10.0.1.0.O...7a9c72f518.tgz
1. Download and install QPST.
2. Download and Extract fastboot rom folder. You can use any latest fastboot rom. If you have Global variant use Global fastboot rom and if China variant use China fastboot rom to prevent being stucked on recovery (Miui version can't be installed in this device).
3. Download patched prog_emmc_firehose_Sdm660_ddr.mbn and copy inside fastboot rom images folder.
4. Try to power cycle phone. Hold Power button for about 20-30 secs or longer. Or try any button combinations. (HOLDPower + VolDOWN) or (Power + VolUP), or (Power + VolDOWN + VolUP).
5. Connect phone to PC, Run QFIL from bin folder, select Flat Build (prog_emmc_firehose_Sdm660_ddr.mbn), Load XML (rawprogram0.xml), (patch0.xml) and click Download.
6. How to flash with QFIL
** TROUBLESHOOTING **
1. If with "Write time out, maybe the device was disconnected" or "cannot receive hello packet" error on MIFlash. Disconnect phone from pc and hold power button again for 20-30 seconds. Reconnect to pc and try again.
2. If with "YOU ARE NOT AUTHORIZED TO DOWNLOAD" error on MIFLASH or 'Only nop and sig tag can be received before authentication' on QFIL, try to power cycle again OR hold those buttons while connecting it to PC. Try every combo and flash again.
3. If all failed then Remove back cover of the phone, do a testpoint. If it still doesn't work Disconnect the batteryconnector.
4. How to testpoint RMN5 .
original source
Downloads:
MiFlash 2018
Prog Emmc Firehose ELF(Patched) mirror
Credits: Chocoml
Any ARB4 fastboot rom:
Global: http://bigota.d.miui.com/V9.6.4.0.OE
China: http://bigota.d.miui.com/V10.0.1.0.OE
1. Download dan Extract fastboot rom folder. bisa mengunakan fastboot rom versi terbaru. Jika menggunakan varian Global maka gunakan Global fastboot rom and jika varian China gunakan China fastboot rom untuk menghindari stuck di logo recovery (Miui version can't be installed in this device).
2. Download dan Replace file "prog_emmc_firehose_Sdm660_ddr.elf" dengan file patched diatas di folder fastboot images.
3. coba nyalakan ulan phone. tahan tombol Power kira-kira 20-30 detik atau agak lama. atau coba bberapa kombinasi tombol, (HOLDPower + VolDOWN) atau (Power + VolUP), atau (Power + VolDOWN + VolUP).
4. Connect phone ke PC, buka MIFLASH, load folder fastboot rom.
5. pilih opsi CLEAN ALL and flash.
6. cara flash via MIFlash
QFIL/QPST METHOD
Downloads:
QPST/QFIL
Prog Emmc Firehose MBN(Patched) mirror Credits: Chocoml
Any ARB4 fastboot rom:
Global: http://bigota.d.miui.com/V9.6.4.0.OE...f5ee62becf.tgz
China: http://bigota.d.miui.com/V10.0.1.0.O...7a9c72f518.tgz
1. Download and install QPST.
2. Download and Extract fastboot rom folder. You can use any latest fastboot rom. If you have Global variant use Global fastboot rom and if China variant use China fastboot rom to prevent being stucked on recovery (Miui version can't be installed in this device).
3. Download patched prog_emmc_firehose_Sdm660_ddr.mbn and copy inside fastboot rom images folder.
4. Try to power cycle phone. Hold Power button for about 20-30 secs or longer. Or try any button combinations. (HOLDPower + VolDOWN) or (Power + VolUP), or (Power + VolDOWN + VolUP).
5. Connect phone to PC, Run QFIL from bin folder, select Flat Build (prog_emmc_firehose_Sdm660_ddr.mbn), Load XML (rawprogram0.xml), (patch0.xml) and click Download.
6. How to flash with QFIL
** TROUBLESHOOTING **
1. If with "Write time out, maybe the device was disconnected" or "cannot receive hello packet" error on MIFlash. Disconnect phone from pc and hold power button again for 20-30 seconds. Reconnect to pc and try again.
2. If with "YOU ARE NOT AUTHORIZED TO DOWNLOAD" error on MIFLASH or 'Only nop and sig tag can be received before authentication' on QFIL, try to power cycle again OR hold those buttons while connecting it to PC. Try every combo and flash again.
3. If all failed then Remove back cover of the phone, do a testpoint. If it still doesn't work Disconnect the batteryconnector.
4. How to testpoint RMN5 .
original source
0 Response to "[TUT] FIX ARB4 Bricked RN5 (QHSUSB 9008) with MIFLASH/QFIL"
Post a Comment